CX11LHG at crystal 16 mhz to 50 mhz high shock, ultra low profile, ultra-miniature at quartz crystal description CX11LHG is a high performance quartz crystal designed to survive the most extreme shock and high vibration application environments. low acceleration sensitivity and low aging performance meets the most demanding requirements. available with tight calibration tolerances and high stability over temperature. features mechanical shock survivability up to 75,000 g ultra-low profile - typical height of 0.5 mm low acceleration sensitivity available hermetically sealed ceramic package excellent aging characteristics full military testing available designed, manufactured and tested in the usa applications industrial & communications down-hole data recorder process control environmental control engine control telemetry ruggedized instrumentation automotive control military & aerospace smart munitions timing devices (fuzes) surveillance devices missile telemetry ruggedized communications aviation equipment statek corporation 512 n. main st., orange, ca 92868 714-639-7810 fax: 714-997-1256 www.statek.com suggested land pattern 10193 rev a thickness (dim c) termination typical maximum inches mm inches mm sm1 0.020 0.51 0.023 0.59 sm2/sm4 0.021 0.53 0.024 0.60 sm3/sm5 0.023 0.58 0.025 0.63 typical maximum dim inches mm inches mm a0.1273.200.1353.43 b0.0601.500.0681.73 csee below d0.0280.710.0370.94 package dimensions 0.071 0.099 (2.51) 0.039 (0.99) inches (mm) 0.059
how to order low profile CX11LHG at crystals terminations designation termination sm1 gold plated sm2 solder plated sm3 solder dipped sm4 solder plated (lead free) sm5 solder dipped (lead free) max process temperature 260 o c for 20 sec. specifications specifications are typical at 25 o c unless otherwise noted. spe-cifi- cations are subject to change without notice. fundamental frequency 1 16.0 mhz 24.0 mhz 32.0 mhz motional resistance r 1 ( )85 30 25 motional capacitance c 1 (ff) 1.5 1.6 1.9 quality factor q (k) 80 150 110 shunt capacitance c 0 (pf) 0.7 0.7 0.9 calibration tolerance 2 ?00 to ?0 ppm, or tighter as required load capacitance 10 pf (unless specified otherwise) drive level 200 w max frequency-temperature ?0 ppm to ?0 ppm (commercial) stability 2,3 ?0 ppm to ?0 ppm (industrial) ?00 ppm to ?0 ppm (military) aging, first year 5 ppm max shock, survival up to 75,000 g, 0.3 ms, 1/2 sine vibration, survival 4 20 g, 10-2,000 hz swept sine operating temp. range -10 o c to +70 o c (commercial) -40 o c to +85 o c (industrial) -55 o c to +125 o c (military) storage temp. range -55 o c to +125 o c max process temperature 260 o c for 20 sec. 1. for frequencies above 50 mhz contact factory. 2. other tolerances available. contact factory. 3. does not include calibration tolerance. the characteristics of the frequency stability over temperature follow that of the at thickness-shear mode. 4. per mil-std-202g, method 204d, condition d. random vibration testing also available. ? /100 / i frequency m = mhz c = ceramic lid sm1 = gold plated sm2 = solder plated sm3 = solder dipped sm4 = solder plated lead free sm5 = solder dipped lead free temp. range: c=-10 o c to +70 o c i =-40 o c to +85 o c m= -55 o c to +125 o c s=customer specified frequency stability over temp.range (in ppm) calibration tolerance @ 25 0 c (in ppm) total frequency tolerance (in ppm) temp. range: c=-10 o c to +70 o c i =-40 o c to +85 o c m= -55 o c to +125 o c s=customer specified or statek corporation 512 n. main st., orange, ca 92868 714-639-7810 fax: 714-997-1256 www.statek.com packaging options ?tray pack ?12 mm tape, 7?r 13?reels per eia 481 (see tape and reel data sheet 10109) cx11l s hg3 c sm1 24.0m , 100 / 100 / / i blank = standard s = special or custom 10193 rev a equivalent circuit blank = 5,000 g hg1 = 10,000 g hg2 = 20,000 g hg3 = 30,000 g hg4 = 50,000 g hg5 = 75,000 g
|
